SP-017 is a flagship Electrodag highly conductive coating designed to provide assistance in achieving electromagnetic compatibility with plastic enclosures.  This high solids, solvent-based product was formulated to provide an extremely conductive coating with excellent adhesion/cohesion properties.

TYPICAL

PROPERTIES                    Pigment : silver-plated copper

(as supplied)                       Binder : acrylic

                                            Solids content by weight : 40.7%

                                            Diluent : MEK, SB-1, or SB-10

                                                      (2:1 by volume, product to solvent)

                                            Density : 10.1 lbs/gal (1.21 kg/l)

                                                       Theoretical coverage : 295 sq ft/gal @ 1 mil

                                                      (5.98 m²/kg @ 25 µm)

                                            Viscosity : 1200 mPa⋅s (Brookfield #3 spindle,  20 rpm RVT)

TYPICAL

PROPERTIES                    VOC : 6.03 lb/gal (723 g/l)

(as sprayed)                        Drying time : 20 minutes air dry then 30 minutes

                                           at 160°F (71°C), or 24 hours air dry

                                            Recommended dry film  

                                           thickness : 1.5-2.0 mils (37.5-51.0 µm)

TYPICAL

PROPERTIES                    Resistivity : 0.075 ohms/sq/mil

(when dried)                        Attenuation : 75 dB @ recommended DFT

                                            Maximum service temperature : 200°F (93°C)